

產品介紹
產品細節: 1794-IF8IH 是具有隔離輸入的HART模擬模塊
Alen-Bradley 1794-IF8IH FLEX /0模塊是具有隔離輸入的HART模擬模塊,它已被北美危險場所認證標準批準在危險的工業環境中安全運行Alen-Bradley 1794-IF8H FLEX 1/0模塊有8個離輸入,也是單端輸入。它與Alen-Bradley Flex l/0 1794-TB3 1794-TB3S終端基座兼容。它使用適馬-德爾塔轉換類型,可以處理單極性和雙極性分辨率,其單極性分辨率為16位,雙極性分辨率為15位加號。該FLEX /0模塊的外部DC電范圍為19.2至31.2伏DC,交流紋波為5%。它的尺寸是3.7 x 3.7 x 2.6英寸。
Alen-Bradley 1794-IF8IH FLEX /0 HART模擬模塊經過工廠校準,但如果模塊的預期應用需要現場校準,也可以進行現場校準,它在5優DC下具有80毫安的Flexbus額定電流,該模塊在31.2伏DC下的最大功耗額定值為4.8瓦,在31.2伏DC下的最大散熱額定值為每小時16.4 BTU。Allen-Bradley 1794-1IF8IH FLEX /模塊可以在32至131華氏度的溫度范圍內安全運行,并且具有開放式外殼。它所需的電線尺寸將取決于它所安裝的終端基座,但是電線必須始終被屏蔽,并且它應該在信號端口上的2類電線中,在電源端口上的3類電線中

Product introduction
Product Details: The 1794-IF8IH is a HART analog module with isolated inputs
The Alen-Bradley 1794-IF8IH FLEX /0 module is a HART simulation module with isolated inputs that has been approved by the North American Hazardous Place Certification Standard for safe operation in hazardous industrial environments. The Alen-Bradley 1794-IF8H FLEX 1/0 module has 8 isolated inputs. Also single-ended input. It is compatible with the Alen-Bradley Flex l/0 1794-TB3 1794-TB3S terminal dock. It uses the Sigma Delta conversion type and can handle both unipolar and bipolar resolutions, with a unipolar resolution of 16 bits and a bipolar resolution of 15 bits plus. The FLEX /0 module has an external DC range of 19.2 to 31.2 volts DC and an AC ripple of 5%. It measures 3.7 x 3.7 x 2.6 inches.
The Alen-Bradley 1794-IF8IH FLEX /0 HART analog module is factory calibrated, but can also be field calibrated if the module's intended application requires field calibration, and it has a Flexbus current rating of 80 mA at 5 optimal DC. The module has a maximum power consumption rating of 4.8 watts at 31.2 volts DC and a maximum heat dissipation rating of 16.4 BTU per hour at 31.2 volts DC. Allen-Bradley 1794-1IF8IH FLEX/module can operate safely in a temperature range of 32 to 131 degrees Fahrenheit and has an open housing. The size of the wire it needs will depend on the terminal base it is mounted on, but the wire must always be shielded, and it should be in the Class 2 wire on the signal port and the Class 3 wire on the power port
主要產品:1794-IF8IH 是具有隔離輸入的HART模擬模塊
公司的
優勢品牌和系列如下:
【霍尼韋爾】模塊DCS/PLC【艾默生/臺達V】模塊【ABB】輸入輸出模塊【AB】模組/觸摸屏
【GE/發那科】IC69系列可編程控制器【本特利內華達】3500系統
【橫河電機】壓力變送器【安川】伺服驅動器/伺服電機
如果您需要詳細的技術信息,歡迎與我們聯系。
為什么洗擇我們:1794-IF8IH 是具有隔離輸入的HART模擬模塊
我們主要從事ABB DCS,??怂共_DCS,霍尼韋爾DCS,西屋公司Ovation DCS,艾默生DeltaV,本特利內華達州,羅克韋爾自動化,
Ssiemens,羅克韋爾CPU,施耐德PLC、GE Fanuc 90/30、90/70、英維思Triconex DCS、FOXBORO/AMOTOROLAMME、西門子等上市廠商。
如果您從任何其他供應商那里找到比我們便宜的相同零件,我們將嘗試匹配相同的價格,或為您提供進一步的折扣。如果您有任何其他問題,請隨時與我們聯系。
如果您查詢多件/物品,請告訴我們,因為我們可以為您安排折扣。



18030183032