欧美国产日韩另类视频区,2025人妻中文字幕乱码在线,日本三级sm在线观看,小说区图片区另类春色,国产第一浮力影产院路线,欧美亚洲综合图片第一页

關于E69F-T-I2-J-R-S FOXBORO轉換器：

一、概述

FOXBORO的E69F系列轉換器是現場安裝型電流氣動信號轉換器，可接受標準直流輸入信號，并將其轉換為比例氣動輸出信號，以便與其他氣動儀表或控制閥一起使用。該轉換器設計緊湊、小巧，易于與電氣和氣動接口連接，并方便地安裝在表面、閥門軛或垂直管道上。

二、型號解析

E69F：表示該轉換器屬于FOXBORO的E69F系列。

T12：可能表示該轉換器的特定技術規格或版本。

JRS：可能表示該轉換器的配置或附加功能，如J可能表示某種特定的輸入/輸出信號選擇，R可能表示反向動作，S可能表示某種特殊配置或標準。

三、主要特點

符合歐盟指令：產品上的“CE”標志表明該轉換器符合適用的歐盟指令。

設計緊湊：體積小，易于安裝和連接。

間隙充足：轉換器中的檢流電機（或電暈電機）設計使線圈和外殼之間有較大的間隙，防止大氣變化中的腐蝕和灰塵顆粒妨礙機械裝置的運行。

適應性強：可選擇輸入和輸出信號、不同的輸入范圍以及直接或反向動作，使該轉換器可輕松適應各種應用。

輸出信號優化：輸出信號的選擇使該轉換器特別適用于閥門應用。

四、技術規格

電源電壓：通常為10V左右（具體數值可能因型號而異）。

額定電流：可能因型號而異，但通常在20A左右。

工作溫度：較寬的工作溫度范圍，如-95℃（某些型號可能有所不同）。

精度：輸出信號代碼不同，量程的精度可能有所不同，如±1.0%或±2%。

線性度：量程的±0.5%（典型值，最大偏差受精度規格限制）。

重復性：量程的±0.25%（典型值，最大偏差受精度規格限制）。

五、應用

該轉換器廣泛應用于工業自動化控制系統中，特別是在需要電流氣動信號轉換的場合，如閥門控制、氣動儀表連接等。

Regarding the E69F-T-I2-J-R-S FOXBORO converter (note: usually letters and numbers in the model are not separated by a dash, here I assume you are referring to FOXBORO's E69F-T12-JRS or similar model), the following is a detailed analysis:

1、 Overview

FOXBORO's E69F series converter is a field installed current pneumatic signal converter that can accept standard DC input signals and convert them into proportional pneumatic output signals for use with other pneumatic instruments or control valves. The converter is designed to be compact and small, easy to connect with electrical and pneumatic interfaces, and conveniently installed on surfaces, valve yokes, or vertical pipelines.

2、 Model analysis

E69F: Indicates that the converter belongs to FOXBORO's E69F series.

T12: may indicate a specific technical specification or version of the converter.

JRS: may represent the configuration or additional features of the converter, such as J may represent a specific input/output signal selection, R may represent reverse action, and S may represent a special configuration or standard.

3、 Main features

Compliant with EU directives: The "CE" mark on the product indicates that the converter complies with applicable EU directives.

Compact design: small size, easy to install and connect.

Adequate gap: The current detection motor (or corona motor) in the converter is designed to have a large gap between the coil and the housing, preventing corrosion and dust particles from interfering with the operation of the mechanical device due to atmospheric changes.

Strong adaptability: The converter can choose input and output signals, different input ranges, and direct or reverse actions, making it easy to adapt to various applications.

Output signal optimization: The selection of output signals makes this converter particularly suitable for valve applications.

4、 Technical specifications

Power supply voltage: usually around 10V (specific values may vary depending on the model).

Rated current: may vary by model, but typically around 20A.

Working temperature: A wide range of working temperatures, such as -95 ℃ (some models may vary).

Accuracy: The accuracy of the range may vary depending on the output signal code, such as ± 1.0% or ± 2%.

Linearity: ± 0.5% of the range (typical value, maximum deviation limited by accuracy specifications).

Repeatability: ± 0.25% of the range (typical value, maximum deviation limited by accuracy specifications).

5、 Application

This converter is widely used in industrial automation control systems, especially in situations where current pneumatic signal conversion is required, such as valve control, pneumatic instrument connection, etc.