

ABB SDCS-FIS-3A DCF803-0035 勵磁板參數說明
全球商業別名:ACS 100 – PAN產品ID:61341722 ABB型號名稱:ACS100-PAN EAN:6410038078904目錄描述:ACS100/140/400控制面板類別產品驅動選項用戶界面選項ACS100-PAN控制面板上一張圖片下一張圖片訂購原產地:中國(CN) 海關稅則號:85049099發票描述:ACS100/140/400控制面板定做:無最小起訂量:1件訂單數量:1件僅報價:無銷售單位:件產品尺寸產品凈重:0 kg產品凈高度:69 mm產品凈長度:15 mm產品凈寬度:50 mm包裝等級1件:1箱附加信息產品主要類型:ACS 100 – PAN產品名稱:控制面板&面板附件分類un spsc:39122004 WEEE環境類別:環保
ABB SDCS-FIS-3A DCF803-0035勵磁板是一款由ABB公司生產的勵磁單元,也稱為勵磁板。DCF803-0035是其主要型號,被廣泛應用于各種工業驅動系統中,特別是在電力驅動系統中,如電機、發電機等。
該勵磁板的主要參數包括額定電壓為3x500V AC,最大電流為35A,并且支持?jǐn)U展/三相電源供電模式。這些特性使得DCF803-0035勵磁板能夠適應不同的工作環境和負載需求。
在水電站發電機中,勵磁系統作為重要組成部分,承擔著調節發電機的出口電壓和機組無功功率的任務。勵磁板是勵磁系統的關鍵組成部分之一,其穩定運行對于保障電力系統的穩定和安全至關重要。
通常,勵磁調節是根據設定好的調節準則,通過采集接受的信號最終實現控制勵磁單元的輸出。對于水電機組來說,根據機組的容量不同,其勵磁方式也不同。容量大于500kW的機組勵磁方式采用自并勵可控硅勵磁,小于500kW的水電機組勵磁方式為雙繞組電抗器分流自復勵方式,投產較早的水電機組勵磁方式為永磁副勵磁機和交流側串聯相復勵方式。
在正常運行情況下,勵磁調節器采用自動電壓調節(AVR)控制方式,通過調節PID調節器的輸出來改變發電機的勵磁電流,從而實現發電機端電壓的穩定。

The ABB SDSC-FIS-3A DCF803-0035 excitation board is an excitation unit, also known as an excitation board, manufactured by ABB. DCF803-0035 is its main model, which is widely used in various industrial drive systems, especially in electric drive systems, such as motors, generators, etc.
The main parameters of the exciter include a rated voltage of 3x500V AC, a maximum current of 35A, and support for extended/three-phase power supply mode. These characteristics enable the DCF803-0035 exciter to adapt to different working environments and load requirements.
The excitation system, as an important part in the generator of hydropower station, assumes the task of regulating the output voltage and reactive power of the generator. Excitation board is one of the key components of excitation system, and its stable operation is very important to ensure the stability and safety of power system.
Generally, excitation regulation is based on the set regulation criteria, by collecting the accepted signal to finally control the output of the excitation unit. For hydropower units, according to the capacity of the unit, its excitation method is also different. The excitation mode of the unit with a capacity greater than 500kW is self-shunt SCR excitation, the excitation mode of the hydropower unit with a capacity less than 500kW is double-winding reactor shunt self-compound excitation, and the excitation mode of the hydropower unit that was put into operation earlier is the permanent magnet secondary exciter and the series phase compound mode of the AC side.
Under normal operation, the excitation regulator adopts the automatic voltage regulation (AVR) control mode to change the excitation current of the generator by adjusting the output of the PID regulator, so as to realize the stability of the generator terminal voltage.

18030183032