A-B羅克韋爾1769-L33ER智能模塊是一款Allen-Bradley的CompactLogix 5370控制器，具備以下特性：
緊湊型設計：1769-L33ER是一款緊湊型Logix控制器，適合中等規模的應用場景 。
以太網通信：該模塊通過以太網端口與控制器或其他設備進行通信，并支持使用Ethernet I/P協議 。
內存容量：擁有2MB的內置用戶內存，并可搭配1GB的非易失性存儲卡，最高可擴展至2GB 。
I/O模塊支持：能夠支持多達16個I/O模塊，并且可以通過適當?shù)臄U展電纜連接最多3個I/O擴展組 。
電源要求：在4個電源模塊下，汲取電流為560mA，最大功耗為4.5瓦 。
安裝方式：支持DIN導軌或面板安裝，提供靈活的安裝選項 。
環境適應性：工作溫度范圍為0至60攝氏度，存儲溫度范圍為-40至85攝氏度，相對濕度不冷凝范圍為0至95% 。
多種電源兼容：可與多種不同的電源配合使用，例如1769-PA4、1769-PA2和1769-PB4 。
雙以太網端口：具有嵌入式雙以太網端口，可作為嵌入式交換機，支持10/100 Mbps數據速率和自動協商功能 。
USB接口：提供一個USB接口，可作為備用通信協議，通常用于主要配置和故障排除 。
狀態指示燈：包括RUN、FORCE、BAT、OK、I/O等LED指示燈，為用戶提供控制器操作的反饋 。
IP地址分配：支持使用Allen-Bradley的BOOTP-DHCP工具進行IP地址分配 。
遠程IO模塊配置：在配置遠程IO模塊1734-AENTR時，可以通過Studio5000軟件進行組態，并設置IP地址 。
The A-B Rockwell 1769-L33ER Smart Module is an Allen-Bradley CompactLogix 5370 controller with the following features:
Compact design: The 1769-L33ER is a compact Logix controller suitable for medium-scale applications.
Ethernet communication: This module communicates with the controller or other devices through an Ethernet port and supports the use of the Ethernet I/P protocol.
Memory capacity: It has 2MB of built-in user memory and can be paired with a 1GB non-volatile memory card, expandable up to 2GB.
I/O Module support: Up to 16 I/O modules can be supported and up to 3 I/O expansion groups can be connected with the appropriate expansion cable.
Power requirements: Under four power modules, the drawing current is 560mA and the maximum power consumption is 4.5 watts.
Mounting method: Supports DIN rail or panel mounting, providing flexible mounting options.
Environmental adaptability: Operating temperature range is 0 to 60 degrees Celsius, storage temperature range is -40 to 85 degrees Celsius, relative humidity non-condensing range is 0 to 95%.
Compatible with a wide range of power supplies, such as 1769-PA4, 1769-PA2 and 1769-PB4.
Dual Ethernet port: Features an embedded dual Ethernet port that functions as an embedded switch, supporting 10/100 Mbps data rate and auto-negotiation.
USB interface: Provides a USB interface that can be used as an alternate communication protocol and is often used for major configuration and troubleshooting.
Status indicators: LED indicators such as RUN, FORCE, BAT, OK, and I/O provide feedback on controller operations.
IP address assignment: The BOOTP-DHCP tool of Allen-Bradley is used to assign IP addresses.
Remote IO module configuration: When configuring the remote IO module 1734-AENTR, you can configure it through the Studio5000 software and set the IP address.
| A-B | 20-750-UFB-1 |
| A-B | 1769-ECR 100 |
| A-B | 1756-L75K |
| WOODWARD | 9907-018 |
| WOODWARD | TG-13 |
| GE | VMIVME7740-740 |
| GE | VMIVME7740-750 |
| GE | IC695CHS012 |
| GE | IC695PSD140 |
| GE | IC695CPE330 |
| GE | IC695RMX128 |
| GE | IC695PNC001 |
| GE | IC200PNS001 |
全國服務熱線
18030183032
郵 箱：3248602330@qq.com
地 址：廈門市思明區呂嶺路1733號創想中心2009-2010單元
Copyright ? 2022-2024 廈門雄霸電子商務有限公司 版權所有 備案號：閩ICP備14012685號-38
18030183032
